Yearly Archives: 2023

◆ Accuracy: 0.05%F.S◆ Weight : 0.65kg◆ Dimensions: 200mm×96mm×47mm Products Description HS215 Multifunction Process Calibrator is a high precision portable instrument. Special design for process control, it can use on site. It can measure and source pressure, resistance, current, frequency, thermal resistance, thermocouple and these second instrument etc. Features ◆ Accuracy: 0.05%F.S ◆ Measure and source voltage, current (active or passive), resistance and frequency ◆ Simulate thermal resistance and thermocouple in the form of temperature ◆ Measurement and output of thermocouple all supply auto and manual temperature compensation ◆ May simulate two-wire system transmitter ◆ Isolated channel, support measurement and output ◆ Automatic identification of three-wire or four-wire connection mode ◆ Perfect performance on waterproof protection: IP67 grade ◆ In case of connecting 220V voltage with automatic over voltage protection function ◆ With manual stepping, automatic stepping and 0 ~ 100% output of phase step and ramp function ◆ LED with white backlight

HS125 Dry Block CalibratorTemperature Range: （-5～125）℃Controller Display Resolution:（-5～100）℃: 0.01℃；（100.0～125.0）℃：0.1℃Absolutely Stability (30min): ±0.05℃Heating:-5℃～125℃: 25minCooling: 125℃～-5℃：30min Description HS125 Dry Block Calibrator — designed by thermal conduction theory and advanced temperature control technology, supply the laboratory accuracy temperature source. each calibrator supplied by Scan-Sense is calibrated against precision equipment, which is traceable to national standards, and calibration certificates are supplied with each unit. HS125 with small size & good appearance, very easy to operate. widely used in petrol, metallurgy, power, military, science institute, metering fields. Application HS125 Dry Block Calibrator are used in temperature sensor calibration for site and laboratory thermocouple as well as thermal resistance. Feture ◆ High precision of temperature control. ◆ Small size with light weight, suitable for field. ◆ Shorter time for heating. Save calibration time. Technical specification ◆     Temperature Range: （-5～125）℃ ◆    Controller Display Resolution: （-5～100）℃: 0.01℃ （100.0～125.0）℃：0.1℃ ◆   Absolutely Stability (30min): ±0.05℃       Heating:-5℃～125℃: 25min       Cooling: 125℃～-5℃：30min ◆    Standard Well Dimension: 2xΦ4.5mm; 2xΦ6.4mm; 1xΦ8mm;…

◆ Temperature range: Ambient to 1000℃（1830℉）◆ Well-to-well Uniformity: ±0.5℃（at 1000℃）◆ Calibration volume: Φ40mm×160mm◆ Power: 115/230 VAC◆ Size:(H×W×D): 370mm×300mm×180mm(14.6in×11.8in×7.1in)◆ Weight:12㎏ Product Description In response to Industrial-level calibration needs CIS designed and manufactured, most reliable calibration dry block with superb functionality to render both on-site and laboratory calibration needs and full fill the EA 10-13 requirements. Great radial homogeneity within ±0.5℃（at 1000℃），enables you to calibrate all kind of temperature sensors more accurately and conveniently. Interchangeable insert blocks, gives you more flexibility to accommodate your temperature sensors with minimal gap in the pockets, which results in lower convection and ultimately lower uncertainty in your measurements. Order code I   Ambient to 300 II  Ambient to 700 III Ambient to 1000 (Please specify voltage required) Standard insert: 1×Φ14mm, 1×Φ12mm, 1×Φ10mm, 2×Φ8mm

◆ Accuracy: 0.05%F.S◆ Weight : 0.35kg◆ Dimensions: 185mm×93mm×47mm Products Description HS216 Hand-held Current and Voltage Calibrator integrates measurement and output of V, mV, mA, Hz into one. High precision, high resolution and reliable. With big LED, the data could be showed more clearly. With adjustable backlight and auto power off function. Direct current or exchange current power supply make it convenient to use. Features ◆  Measure and source voltage, current (active or passive), mV and frequency.◆ May simulate two-wire channel transmitter.◆ Perfect performance on waterproof protection: IP67 grade◆ In case of connecting 220V voltage with automatic over voltage protection function◆ With manual stepping, automatic stepping and 0 ~ 100% output of phase step and ramp function.◆ Big LED with adjustable backlight and auto power off function.◆ Supply DC24V loop power.

◆ Steady & Servo control pressure◆ Five pieces outputs ,make calibration more efficient◆ Generated pressure range: (0~60)bar◆ Working medium:Air Product Description HS316G Steady Servo Electrical Pressure Calibrator adopts  gas-gas push principle. the extra air sources give active power to pre-pressure for the whole calibrating system,perfectly instead of the heavy and compiex hand work operation. Servo control pressure and dynamic equilibrium design that make the pressure values very exact and stability. Pressure regulator adjust the exact pressure value with the min adjust resolution 1kPa. Very save labor ,only a finger can pressurize to full scale.5pcs pressure output interface with stainless steel material .that can calibrate four pressure gauges once time. The quick coupling is easy to install pressure instrument without using the wrenches. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the pressure. Following the points above mentioned, It’s main…

◆ Steady & Servo control pressure◆ Five pieces outputs,make calibration more efficient◆ Generated pressure range: (0~600)bar Product Description HS319L Steady Servo Electrical Pressure Calibrator adopts gas-liquid push or gas-gas push principle. the extra air sources give active power to pre-pressure for the whole calibrating system, perfectly instead of the heavy and compiex hand work operation. Servo control pressure and dynamic equilibrium design that make the pressure values very exact and stability.  Pressure regulator adjust the exact pressure value with the min adjust resolution 1kPa. Very save labor ,only a finger can pressurize to full scale. 5pcs pressure output interface with stainless steel material .that can calibrate four pressure gauges once time. The quick coupling is easy to install pressure instrument without using the wrenches. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the pressure. Following the…

◆ Steady & Servo control pressure◆ Five pieces outputs,make calibration more efficient◆ Generated pressure range: (0~600)bar Product Description HS318LSteady Servo Electrical Pressure Calibrator adopts gas-liquid push or gas-gas push principle. the extra air sources give active power to pre-pressure for the whole calibrating system, perfectly instead of the heavy and compiex hand work operation. Servo control pressure and dynamic equilibrium design that make the pressure values very exact and stability.  Pressure regulator adjust the exact pressure value with the min adjust resolution 1kPa. Very save labor ,only a finger can pressurize to full scale. 5pcs pressure output interface with stainless steel material .that can calibrate four pressure gauges once time. The quick coupling is easy to install pressure instrument without using the wrenches. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the pressure. Following the points…

◆ First model ,unique design◆ Steady & Servo control pressure◆ Five pieces outputs ,make calibration more efficient◆ Generated pressure range: (0~60)bar Product Description HS317L Steady Servo Electrical Pressure Calibrator adopts  gas-oil push principle. the extra air sources give active power to pre-pressure for the whole calibrating system,perfectly instead of the heavy and compiex hand work operation. Servo control pressure and dynamic equilibrium design that make the pressure values very exact and stability. Pressur regulator adjust the exact pressure value with the min adjust resolution 1kPa. Very save labor ,only a finger can pressurize to full scale. 5pcs pressure output interface with stainless steel material .that can calibrate four pressure gauges once time. The quick coupling is easy to install pressure instrument without using the wrenches. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the…

◆ First model ,unique design◆ Steady & Servo control pressure◆ Five pieces outputs ,make calibration more efficient◆ Generated pressure range: (0~25)bar Product Description HS316L Steady Servo Electrical Pressure Calibrator adopts  gas-gas push principle. the extra air sources give active power to pre-pressure for the whole calibrating system,perfectly instead of the heavy and compiex hand work operation. Servo control pressure and dynamic equilibrium design that make the pressure values very exact and stability. Pressure regulator adjust the exact pressure value with the min adjust resolution 1kPa. Very save labor ,only a finger can pressurize to full scale.5pcs pressure output interface with stainless steel material .that can calibrate four pressure gauges once time. The quick coupling is easy to install pressure instrument without using the wrenches. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the pressure. Following the points above mentioned,…

◆ Pressure Range: (0~600) bar◆ Working Media:Distilled water◆ Weight: 16Kg Product Description HS319 Electric Comparator adopts gas-liquid push principle.the extra air sources give active power to pre-pressure for the whole calibrating system,perfectly instead of the heavy and complex hand work operation. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the pressure.Following the points above mentioned, It’s main features is in saving both effort and time, which is very suitable to doheavy & repeat calibration works. Technical Specification ◆ Pressure Range: (0~600) bar◆ Working Media:Distilled Water◆ Output Interface: M20×1.5 Female◆ Dimensions (L×W×H): 500mm×350mm×135mm◆ Weight: 16Kg Functions HS319 is an ideal solution in the laboratory for calibrating pressure transmitters, pressure gauges, pressure switches & other industrial pressure instruments. Characteristics ◆ Fast stability, labor saving, simple operation◆ Small size, light weight◆ Non-leaking, convenient clean◆ With pre-pressurizing function